Star Trek Prop Archive

REF // 1778-0149

CONTROL PANELS FROM THE ENTERPRISE ARMORY SET

Six NX-01-style prop control panels made from black acrylic plastic with laminated vinyl print control surfaces and raised rubber buttons, largest -- 9x20in. -- …

REF // 1778-0150

FREESTANDING NX-01-STYLE CONSOLE

A prop control console with simulated buttons in NX-01 style, inscribed in paint marker Bridge console - Voyager, N.D. console - Ent. -- 47x42in. …

REF // 1778-0151

ENTERPRISE CARGO TRANSPORTER CONTROL CONSOLE

A small freestanding prop NX-01-style control console with three simulated control levers and prop control buttons -- 26x42in. -- used as the cargo transporter …

REF // 1778-0152

UPRATED TRANSPORTER CONSOLE

An arc-shaped prop control console with tube metal base, with NX-01-style prop control buttons and three operating slide levers -- 70x44in. -- used as …

REF // 1778-0153

ENTERPRISE NX-01 AIRLOCK CONTROL CONSOLE

A theatrical wall unit incorporating a prop control panel with simulated instrumentation, operator's panel is hinged, opening to reveal simulated circuitry -- 80x32in.

REF // 1778-0154

CYLINDRICAL CONTROL CONSOLE

[partial] A cylindrical prop control unit with two inset control surfaces with NX-01-style prop buttons and untested backlit indicator displays, one upper ...

REF // 1778-0155

INSPECTION POD CONTROL PANEL

A prop spaceship control console with NX-01-style backlit simulated instruments and simulated buttons and a pilot's control stick -- 71x34x38½in. -- used in the …

REF // 1778-0156

XINDI INSECTOID CONTROL CONSOLE

An unusual freestanding console with canted cylindrical base and acrylic dome top with aluminum sliding prop control levers, secondary side panels feature Xindi backlit …

REF // 1778-0157

XINDI INSECTOID CONTROL PEDESTALS

Four alien prop control consoles featuring [untested] internally-lit clear acrylic domes with hex pattern detailing, edge-lit yellow acrylic main disk, and Xindi-style "insectoid claw" …

REF // 1778-0158

ANDORIAN CONTROL CONSOLE

A freestanding console with two backlit graphic panels, painted blue for use on an Andorian ship in Star Trek: Enterprise -- 47x52x26in.

REF // 1778-0159

T'POL'S ENTERPRISE BRIDGE CONSOLE

A control console made of particle board with simulated buttons and instruments and an open area designed to receive an LCD computer monitor -- …

REF // 1778-0160

ROMULAN CONTROL CONSOLES

Two alien control consoles on a common wood base, made from shield-shaped heat-formed sheets of clear acrylic plastic, control graphics applied to the surface …

REF // 1778-0161

KLINGON CONTROL CONSOLE

A stand-up control console with Klingon backlit graphics, inscribed on the base Klingon console Enterprise -- 48½x52½x24in. -- used in "Sleeping Dogs" in Star …

REF // 1778-0162

NX-01 ENGINEERING WALL

Two theatrical wall units made from wood and particle board painted as steel on wheeled bases with simulated control panels and other prop technical …

REF // 1778-0163

ENTERPRISE NX-01 CORRIDOR WALL AND DOOR

A theatrical wall flat made of wood and particle board, painted to simulate riveted steel construction, with an inset nonfunctional wood door painted metallic …

REF // 1778-0164

ENTERPRISE SHUTTLEPOD COCKPIT

A mockup of the forward section of an Enterprise NX-01 shuttlepod -- 113x94x68in. -- with both exterior and interior detail, exterior represents about one-third …

REF // 1778-0165

CAPTAIN'S LOG AND STARSHIP TECHNICAL MANUAL FOLDERS

Two aluminum three-ring binders with grey cut vinyl Enterprise mission emblems on the cover and the title Captain's Starlog, NX-01-001A -- 10½x12in. -- made …

REF // 1778-0166

CAPTAIN ARCHER'S WATER POLO BALL AND WATER POLO AWARDS

A water polo ball, with NFHS trademark, labeled Men's Size, brand name painted out; and two awards, one a certificate co-signed by Jake Elwood …

REF // 1778-0167

JONATHAN ARCHER'S MODEL SPACESHIP

A custom-made plastic model of a two-person, winged spacecraft, with removable windshield and nonfunctional prop control device -- 27x33x7in. -- used in the opening …